AT Commands Phone Terminal Terminated 57
AT*EDIF Divert Function
Parameters:
<line>:
<line> Description
1 Line 1
2 Line 2
<index>:
<index> Description
1 Home network voice mail number
2 Roaming voice mail number
<onoff>:
<onoff> Description
1 Enable the voice mail number
<number>: Character string; ‘0-9,+’.
<nlength>: Maximum number of characters in <number>
<type>: Integer; type of address octet.
<type> Description
128-255 Valid values
129 ISDN / telephony numbering plan, national/international
unknown
Default setting
145 ISDN / telephony numbering plan, international number
161 ISDN / telephony numbering plan, national number
Description: This command enables and disables notification of divert status changes with the
unsolicited result code *EDIF.
Set command: AT*EDIF=<onoff>
Read command: AT*EDIF? Displays the current <onoff> setting.
Test command: AT*EDIF=? Shows if the command is supported.
Test command
response:
*EDIF: (List of supported <onoff>s)
Parameter:
<onoff>:
<onoff> Description
0 Disable notification with the unsolicited result code *EDIF
1 Enable notification with the unsolicited result code *EDIF