Ericsson T39 - Page 64

AT Commands Phone Terminal Terminated 62
+CCCM Advice of Charge Call Meter Notification
*EDIF Divert Function
Description: This unsolicited result code is sent when the CCM value changes, but not more often
than every 10 seconds. The result code is enabled by using AT+CAOC.
Unsolicited result code:+CCCM: <ccm>
Parameter:
<ccm>: String; hexadecimal form of three bytes of the current call meter value. The value is in
home units and the bytes are coded similarly as the ACMmax value in the SIM.
Description: This unsolicited result code is sent when the call forwarding information for the phone
is changed. The result code is enabled by using AT*EDIF.
Unsolicited result code:*EDIF: <reason>,<status>,<classx>[,<number>[,<type>]]
Parameters:
<reason>:
<reason> Description
0 Unconditional
1 Mobile phone busy
2 No reply
3 Not reachable
<status>:
<status> Description
0 Disabled
1 Enabled; the phone is diverted for the <reason> above
<classx>:
<classx> Description
1 Voice L1
2 Data
4 Fax
1-127 All other values below 128 are reserved by ETSI
128 Voice L2
<number>: String; phone number of forwarding address. Format specified by <type>.
<type>: Integer; type of address octet.
<type> Description
145 Default setting when dialling string includes the
international access code character ‘+’
129 Default setting when dialling string does not include the
international access code character ‘+’