AT Commands Phone Terminal Terminated 63
4.14.3 Use scenarios
Calling Line Identification
This use scenario performs the following steps:
• Enable calling line identification
• Receive calling line identity indication when receiving a mobile-terminated call
• Disable calling line identification
Call Hold and Multiparty
This use scenario uses the call hold functionality to switch between two calls.
AT command Response Comment
AT+CLIP=1 Enable
OK
+CRING: VOICE
+CLIP:
”0706123456”,
129
After every CRING, the calling line identity is presented
Reject call
AT+CLIP?
+CLIP: 1,1
OK
CLIP enabled and provisioned
AT+CLIP=0 Disable
OK
AT command Response Comment
AT+CCWA=1,1 Activate call waiting
ATD046193000; OK Originate a voice call
+CCWA:
”+46706123456”,
145
Another call is waiting
AT+CHLD=2 Put first call on hold and answer the second call
OK
AT+CHLD Release the second call and recover the first call
OK
To Next Page
Loading...
