Ericsson T39 - Voice Memo Functions; Recording Voice Memos; Listening to Voice Memos

AT Commands Phone Terminal Terminated 85
AT*EKSE Keystroke Send
AT*EIMR Input Method Change Report
<text>: Text to be displayed; may not contain <CR>.
<ltext>: Integer; maximum number of characters in <text>.
Description: Sends a keystroke identifier to the MT. The MT will make a context-sensitive
interpretation of the keystroke, based on the state of the MMI.
Set command: AT*EKSE=<key>[,<time>]
Test command: AT*EKSE=? Shows if the command is supported.
Test command
response:
*EKSE: (list of supported <key>s),(list of supported <time>s)
Parameters:
<key>:
<key> Description
0-65535 Keystroke identifier
<time>: Reports how long the key is pressed.
<time> Description
0-255 0-25.5 seconds
Description: Set command enables unsolicited result code *EIMV which indicates that the input
method has been changed.
Set command: AT*EIMR=<onoff>
Read command: AT*EIMR? Displays the current <onoff> setting.
Test command: AT*EIMR=? Shows if the command is supported.
Test command
response:
*EIMR: (list of supported <onoff>s)
Parameter:
<onoff>:
<onoff> Description
0 Unsolicited result code *EIMV is disabled
1 Unsolicited result code *EIMV is enabled