Ericsson T39 - Page 135

AT Commands Phone Terminal Terminated 133
4.24.2 Unsolicited result codes
*EPEV PIN Code Event
*EVOLC PIN Code Event
*EKSC Key Sound Change Report
*EBCA Indication Algorithm Status
Description: This unsolicited result code is returned when a PIN code has been entered and
accepted. The result code is activated using AT*EPEE.
Unsolicited result code:*EPEV
Description: This unsolicited result code is returned when a user has made a change in the volume
control. The result code is activated using AT*EQVL.
Unsolicited result code:*EVOLC: <current_volume>
Parameter:
<current_volume>:
<current_volume> Description
0 Volume low
1-6 Steps in volume
7 Volume high
Description: This unsolicited result code is returned when a user has made a change in the key
sound setting. This result code is also sent upon successful execution of AT*EKSR=’1’.
The result code is activated using AT*EKSR.
Unsolicited result code:*EKSC: <mode>
Parameter:
<mode>:
<mode> Description
0 SILENT; no sound when a key is pressed
1 CONTINOUS TONE; a continuous tone while a key is
pressed
2 CLICK; a click when a key is pressed
Description: This unsolicited result code indicates the changes in status for the parameters of the
charging algorithm. The result code is activated using AT*EBCA.
Unsolicited result code:*EBCA: <vbat1>,<vbat2>,<vbat3>,<vbat4>,<btype>,<dcio>,<icharge>,<iphone>,
<acapacity>,<ccapacity>,<pacapacity>,<ncapacity>,<tempbattery>,<tempphone>,
<bcapacity>,<chargestate>
Parameters: See AT*EBCA.