Ericsson T39 - Page 127

AT Commands Phone Terminal Terminated 125
AT*EKSR Key Sound Change Report
Test command: AT*EENL=? Shows if the command is supported.
Test command
response:
*EENL: <nenvnr>
Parameters:
<accessory_id>:
<accessory_id> Description
1 Portable handsfree; presented in ME ass
PORTABLE_HF_TXT
2 Vehicle handsfree; presented in the ME as
VEHICLE_HF_TXT
3 RS232 cord; presented in ME as DATA_CABLE_TXT
4 IR device; presented in ME as INFRARED_MODEM_TXT
6 Charger (intelligent); presented in ME as
DESKTOP_CHARGER_TXT+<nr>
7 Charger (simple); presented in ME as
TRAVEL_CHARGER_TXT
8 Reserved for MC-link
12 External handset; presented in ME as
EXTERNAL_HANDSET_TXT
13 Internal IR device
15 Audio player
50 Chatboard
16-255 Reserved for future accessories; presented in ME as
ACCESSORY_TYPE_TXT+<accessory_id>
<unique_id>:
<unique_id> Description
0 Request a new unique identifier from the phone
1-65534 Unique identifier for a unique accessory
65535 Default value used by non-unique accessories
<env_name>: String; name of the environment.
<nenvnr>: Integer; maximum number of environments known to the phone.
Description: Sets and queries the key sound settings of the phone as sent over the AFMS. The
command is also used to turn on/off the unsolicited result code *EKSC that reports
changes in key sound settings.
Execution command: AT*EKSR=<report>
Read command: AT*EKSR? Displays the current <report> and <mode> settings.
Test command: AT*EKSR=? Shows if the command is supported.
Test command
response:
*EKSR: (list of supported <report>s),(list of supported <mode>s)