AT Commands Phone Terminal Terminated 126
AT*EPED Environment Delete
Parameters:
<report>:
<report> Description
0 Key sound change report (*EKSC) disabled
Default setting
1 Key sound change report (*EKSC) enabled
<mode>:
<mode> Description
0 SILENT; no sound when a key is pressed
1 CONTINOUS TONE; a continuous tone while key is
pressed
2 CLICK; a click when a key is pressed
Description: Deletes an environment from the list of environments associated with the current
profile.
Execution command: AT*EPED=<accessory_id>[,<unique_id>]
Test command: AT*EPED=? Shows if the command is supported.
Parameters:
<accessory_id>:
<accessory_id> Description
1 Portable handsfree; presented in ME ass
PORTABLE_HF_TXT
2 Vehicle handsfree; presented in the ME as
VEHICLE_HF_TXT
3 RS232 cord; presented in ME as DATA_CABLE_TXT
4 IR device; presented in ME as INFRARED_MODEM_TXT
6 Charger (intelligent); presented in ME as
DESKTOP_CHARGER_TXT+<nr>
7 Charger (simple); presented in ME as
TRAVEL_CHARGER_TXT
8 Reserved for MC-link
12 External handset; presented in ME as
EXTERNAL_HANDSET_TXT
13 Internal IR device
15 Audio player
50 Chatboard
16-255 Reserved for future accessories; presented in ME as
ACCESSORY_TYPE_TXT+<accessory_id>