AT Commands Phone Terminal Terminated 127
AT*EPEW Environment Write
<unique_id>:
<unique_id> Description
0 Request a new unique identifier from the phone
1-65534 Unique identifier for a unique accessory
65535 Default value used by non-unique accessories
Description: Adds an environment to the list of environments associated with the current profile.
Execution command: AT*EPEW=<accessory_id>[,<unique_id>]
Read command: AT*EPEW?
Read command
response:
*EPEW: <accessory_id1>,<unique_id1>,<env_name1><CR><LF>
[*EPEW: <accessory_id2>,<unique_id2>,<env_name2><CR><LF>
[...]]
Test command: AT*EPEW=? Shows if the command is supported.
Test command
response:
*EPEW: <nenvnr>
Parameters:
<accessory_id>:
<accessory_id> Description
1 Portable handsfree; presented in ME ass
PORTABLE_HF_TXT
2 Vehicle handsfree; presented in the ME as
VEHICLE_HF_TXT
3 RS232 cord; presented in ME as DATA_CABLE_TXT
4 IR device; presented in ME as INFRARED_MODEM_TXT
6 Charger (intelligent); presented in ME as
DESKTOP_CHARGER_TXT+<nr>
7 Charger (simple); presented in ME as
TRAVEL_CHARGER_TXT
8 Reserved for MC-link
12 External handset; presented in ME as
EXTERNAL_HANDSET_TXT
13 Internal IR device
15 Audio player
50 Chatboard
16-255 Reserved for future accessories; presented in ME as
ACCESSORY_TYPE_TXT+<accessory_id>
<unique_id>:
<unique_id> Description
0 Request a new unique identifier from the phone
1-65534 Unique identifier for a unique accessory
65535 Default value used by non-unique accessories