Ericsson T39 - Page 130

AT Commands Phone Terminal Terminated 128
AT*EAPS Active Profile Set
AT*EAPN Active Profile Rename
<env_name>: String; environment name.
<nenvnr>: Integer; maximum number of environments possible to associate with a profile.
Description: Selects the active phone profile. The profiles may be renamed using AT+EAPN.
The profile consists of the parameters and settings for the following commands:
AT Command Name Ensemble
AT+CCFC
AT*EDIF
AT*EDIS
Call Forwarding Number and Conditions
Divert Function and Reporting
Divert Set
S6
AT*ELIN Set Line S6
AT*ERIL Ring Level Set S9
AT*ECAS Set Callers Allowed S16
AT*ESBL Set Back Light Mode S9
AT*ESCN Set Credit Card Number S6
AT*ESIL Silence Command S9
AT+CVIB Vibrator Mode S9
AT*EPEW
AT*EPED
List of Environments S20
Set command: AT*EAPS=<index>
Read command: AT*EAPS? Displays the current <index> and <name_tagx> settings.
Test command: AT*EAPS=? Shows if the command is supported.
Test command
response:
*EAPS: (list of supported <index>s),<nlength>
Parameters:
<index>:
<index> Description
1-7 Profile number
<name_tagx>: String; profile name tag.
<nlength>: Integer; maximum length of <name_tagx>.
Description: Sets a new name for the active profile.
Set command: AT*EAPN=<name_tag>
Read command: AT*EAPN? Displays the current parameter settings.
Read command
response:
*EAPN: <index1>,<name_tag1><CR><LF>
[*EAPN: <index2>,<name_tag2><CR><LF>
[...]]