AT Commands Phone Terminal Terminated 138
AT*EWHP WAP Homepage
AT*EWPR WAP Profiles
AT*EWPN WAP Profile Name
Description: Sets the homepage (start page) for the WAP browser.
Set command: AT*EWHP=<url>
Read command: AT*EWHP? Displays the current <url> setting.
Test command: AT*EWHP=? Shows if the command is supported.
Test command
response:
*EWHP: <nurl>
Parameters:
<url>: String; the URL representing the homepage.
<nurl>: Integer; maximum length of <url>.
Description: Selects active WAP settings profile
Set command: AT*EWPR=<profile>
Read command: AT*EWPR?
Read command
response:
*EWPR: <profile>
Test command: AT*EWPR=? Shows if the command is supported.
Test command
response:
*EWPR: (list of supported <profile>s)
Parameter:
<profile>:
<profile> Description
1 WAP settings profile number 1
2 WAP settings profile number 2
... ...
5 WAP settings profile number 5
Description: Sets the name of <profile>.
Set command: AT*EWPN=<profile>,<name>
Read command: AT*EWPN?
Read command
response:
*EWPN: <profile1>,<name1><CR><LF>
[*EWPN: <profile2>,<name2><CR><LF>
[...]]
Test command: AT*EWPN=? Shows if the command is supported.
Test command
response:
*EWPN: (list of supported <profile>s),<nlength>