Ericsson T39 - Page 144

AT Commands Phone Terminal Terminated 142
AT*EWCT WAP Connection Timeout
4.27.3 Use scenarios
WAP Browser Settings
Description: Sets timeout time used when connecting to a WAP supplier, i.e. the time the WAP-
browser will wait for a CSD call to be established.
Read command: AT*EWCT=<sec>
Read command
response:
*EWCT: <sec>
Test command: AT*EWCT=? Shows if the command is supported.
Test command
response:
*EWCT: (list of supported <sec>s)
Parameter:
<sec>: Integer; number of seconds.
<sec> Description
60-300 Valid values
AT Command Response Comment
AT*EWIL=1 Enable image download
OK
AT*EWHP=”http://
www.ericsson.se”
Set WAP homepage
OK
AT*EWDT=10 Set download timeout to 10 seconds
OK
AT*EWCT=10 Set connection timeout to 10 seconds
OK
AT*EWPR? Query active WAP settings profile
*EWPR: 2
OK
Profile ‘2’ is active
AT*EWPN=2,”Off” Change name of WAP settings profile number
OK
AT*EWPN? Query WAP settings profile name(s)
*EWPN: 1,”Priv”
*EWPN: 2,”Off”
*EWPN: 3,”Telia”
OK