Model 5601MSC
Model 5601MSC Master SPG/Master Clock System
Page - 94 Revision 2.2 MASTER CLOCK
4.3.8. Selecting the SNTP IP Enable
The NTP IP Mode is to enable or disable the eight servers that can be used
as an SNTP time reference. These are valid only when the time reference
has been set to SNTP.
Up to 8 servers can be set up
. During the daily time sync to SNTP, the
5601MSC will contact each server that is enabled and
the best time, based on the data provided by the servers.
4.3.9. Selecting the SNTP IP Address
The NTP IP address defines the IP address of one of the eight NTP servers
that can be used as an SNTP time reference. These are valid only when the
time reference has been set to SNTP.
Up to 8 servers can be set up. During the daily time sync to SNTP, the
5601MSC will contact each server that is enabled and chose the one with
the best time, based on the data provided by the servers.
To Next Page
Loading...
