evertz 5601MSC - Configuring Access to Front Panel Menus

Model 5601MSC
Model 5601MSC Master SPG/Master Clock System
MASTER CLOCK Revision 2.2 Page - 141
4.5.9.4. Configuring Access to Front Panel Menus
The Menu Access Ctl sub-menu of the EngineeringMenu setup menu is used to control access to
menus in the front panel menu system. It has no effect on SNMP control (if enabled) of these menus.
This can be used to prevent unauthorized changes from the front panel. There is a master control to
turn on or off menu restrictions. If some menus need to be disabled this master control must first be
turned on, only then can individual menus be disabled.
4.5.9.4.1. Enabling and Disabling Front Panel Menu Access Control
GENERAL
This menu item enables or disables menu access control for the front
panel menu system.
Setting this to All Menus Normal
disables menu restrictions and all
menus will be fully accessible in the front panel menu system.
Setting this to Menu Locks On enables menu restrictions and individual
menus access can be controlled using the sub-
menus in section
4.5.9.4.2.
EngineeringMenu
Menu Access Ctl
MASTER Access
All Menus Normal
Menu Locks On