evertz 5601MSC - Signal List for HD, 1280 X720; Additional Signals in Compactflash for HD, 1280 X720; Signal List for 2048 X1080, 3 GB and Dual Link; Additional Signals in Compactflash for 2048 X1080, 3 GB and Dual Link

Model 5601MSC
Model 5601MSC Master SPG/Master Clock System
Page - 126 Revision 2.2 MASTER CLOCK
4.4.5.5. Signal List for HD, 1280x720
BLACK
LAB BARS, MOVING BOX
1 SEC AND 5 SEC IDENT. W.AUDIO
WHITE
VALID RAMP
MULTIPULSE
FULL FIELD PLUGE
SDI CHECKFIELD
60% Y LINE SWEEP TO 30MHz
75% COLORBARS
GREY (QUIET)
CIRCLE WITH CENTER CROSS
75% COLORBARS W.100% WHITE
GREY (ACTIVE)
CLEAN APERTURE WITH GRATICULE
100% COLORBARS
10 FRAME SEQUENCE
RP219 COLORBARS
Y MULTIPULSE
4.4.5.6. Additional Signals in CompactFlash for HD, 1280x720
FRAME ID
12% WHITE WINDOW
60% Y MB: 10,12,14,16,18,20MHz
107% WHITE WINDOW
FULL AMPLITUDE FAST EDGES
60% Y MB: 20,22,24,26,28,30MHz
100% WHITE WINDOW
BOUNCING BOX
60% MB: 1,2,4,6,8,10MHz
80% WHITE WINDOW
WHITE FLASH W.AUDIO
60% MB: 10,12,14,16,18,20MHz
50% WHITE WINDOW
60% Y LINE SWEEP 15 TO 30MHz
60% MB: 20,22,24,26,28,30MHz
20% WHITE WINDOW
60% Y MB: 1,2,4,6,8,10MHz
PRODUCTION APERTURE
4.4.5.7. Signal List for 2048x1080, 3GB and Dual Link
BLACK
RP219 COLORBARS
8 FRAME SEQUENCE
WHITE
VALID RAMP
MULTIPULSE
FRAME IDENT.
SDI CHECKFIELD
Y MULTIPULSE
100% COLORBARS
GREY (QUIET)
CLEAN APERTURE WITH GRATICULE
75% COLORBARS
GREY (ALL DATA BITS ACTIVE)
75% BARS, 100% WHITE
FULL FIELD PLUGE
4.4.5.8. Additional Signals in CompactFlash for 2048x1080, 3GB and Dual Link
LAB BARS, MOVING BOX
Y RAMP TO MAX AND BACK
INTEROCULAR CROSTALK BANDS
BLACK AND BARS
Y RAMP AT VARIOUS BIT RESOLNS
CAMERA SUNDANCE
FULL FIELD PLUGE
CB RAMP AT VARIOUS BIT RESOLNS
SUNDANCE 3D DUAL LINK
VALID RAMP
CR RAMP AT VARIOUS BIT RESOLNS
RED RAMP
WHITE FLASH W. AUDIO
DUAL LINK SDI CHECKFIELD
GREEN RAMP
107% WHITE WINDOW
3G LEVEL B SDI CHECKFIELD
BLUE RAMP
100% WHITE WINDOW
CLEAN APERTURE WITH GRATICULE
CIRCLE WITH CENTER CROSS
80% WHITE WINDOW
GRATICULE WITH 3D REG.
PRODUCTION APERATURE
50% WHITE WINDOW
3D ALIGNMENT SIGNALS
60% Y LINE SWEEP TO 30MHz
20% WHITE WINDOW
ROLLING 11 FRAME STEREO BOX
Y MULTIPULSE
12% WHITE WINDOW
ROLLING 3:2 FILM STEREO BOX
MULTIPULSE
Y MULTIPULSE
ROLLING 11 FIELD STEREO BOX
4.4.6. Configuring the Analog Audio Outputs
The two channels of balanced analog audio are configured in the Analog Audio menu located in the
OUTPUT root menu. These outputs are provided on the AUDIO terminal block on the rear of the
5601MSC (see section 3.1.8). These outputs can be driven in two different modes chosen by the Audio
Mode menu item. They can generate steady tones, or can be driven in event mode to generate timed
tones of different types and durations.