Model 5601MSC
Model 5601MSC Master SPG/Master Clock System
TECHNICAL DESCRIPTION Revision 2.2 Page - 171
5.1.13. Power Supplies
Voltage: Auto-ranging 100 - 240 Volts AC, 50/60Hz
Power Factor: > 0.7
Configuration: Optional redundant supply available with PS option
Power Consumption
Warm-Up: 75 watts max (with all options installed and max LTC1/GPS power draw)
LTC1 power on: 65 watts typical (warmed up and operating with all options installed)
LTC1 power off: 57 watts typical (warmed up and operating with all options installed)
5.1.14. Compliance
Safety: ETL Listed, complies with EU low voltage directive
EMI/RFI: Complies with FCC Part 15 Class A regulations
Complies with EU EMC directive
CE Marked
ROHs: Complies with EU ROHs directive
5.1.15. Mechanical and Environmental
Dimensions: 19“ Width x 1.75” Height x 11.5” Depth (without front panel installed)
(483mm Width x 45mm Height x 292mm Depth)
Weight: 8 lbs (3.6kg)
Mounting Clearance: Requires 2” (5cm) clearance around fan exhaust on both sides
Operating Temperature: 0ºC to +40ºC (32ºF to 104ºF) ambient
5.1.16. Ordering Options
+2PS Redundant power supply
+M Modem Option
+GP GPS Option (includes GPS receiver and 50’ weatherproof cable)
+T Network Time Protocol (Must be ordered with +GP or +M option)
+IRIG IRIG-B Timecode Support (1x Input and 2x Outputs)
+SDTG 4 Dual output SD SDI Test/Black generators
2 NTSC/PAL test signal generator outputs
2 Analog Audio tone generators
1 DARS generator (balanced & unbalanced)
2 AES generators (balanced & unbalanced)
+HDTG 4 Dual output configurable SD/HD SDI Test/Black generators
2 NTSC/PAL test signal generator outputs
2 Analog Audio tone generators
1 DARS generator (balanced & unbalanced)
2 AES generators (balanced & unbalanced)
+3GTG 4 Dual output configurable SD/HD/Dual Link/3G SDI Test/Black generators
3D Test Patterns
2 NTSC/PAL test signal generator outputs
2 Analog Audio tone generators
1 DARS generator (balanced & unbalanced)
2 AES generators (balanced & unbalanced)
To Next Page
Loading...
