evertz X1201S - How to Turn off the GPO Override (Return the Gpos to Their Programmed

X1200 Series Router Manual
Revision 1.3.2
OPERATION
3.11. MANUALLY ACTIVATING THE BYPASS RELAYS ............................................................ 3-15
3.11.1. Manually Activating All the Bypass Relays................................................................. 3-16
3.12. CONFIGURING THE GENERAL PURPOSE INPUTS (GPI) ................................................ 3-16
3.12.1. How to Override (Temporarily Disable) the GPI Functions ........................................ 3-16
3.12.2. How to turn off the GPI Override (Return the GPIs to their Programmed Functions) 3-16
3.12.3. Configuring the Encoding mode for the GPI Inputs.................................................... 3-17
3.12.3.1. Standard GPI Encoding ............................................................................. 3-17
3.12.3.2. HEX GPI Encoding..................................................................................... 3-17
3.12.3.3. AFV HEX GPI Encoding............................................................................. 3-18
3.12.4. Configuring Whether the GPI Inputs are Edge or Level Activated ............................. 3-19
3.12.5. Programming the GPI Inputs Functions ..................................................................... 3-20
3.13. CONFIGURING THE GENERAL PURPOSE OUTPUTS (GPO)........................................... 3-20
3.13.1. How to Override (Temporarily Disable) the GPO Functions ...................................... 3-21
3.13.2. How to turn off the GPO Override (Return the GPOs to their Programmed Functions)3-
21
3.13.3. Configuring the Encoding mode for the GPO Outputs ............................................... 3-21
3.13.3.1. HEX GPO Encoding................................................................................... 3-21
3.13.4. Configuring Whether the GPO Outputs are Latched or Momentary........................... 3-22
3.13.5. Programming the GPO Output Functions .................................................................. 3-22
3.14. CONFIGURING THE REMOTE CONTROL PORT OPERATION......................................... 3-22
3.14.1. Selecting the Baud Rate for Remote Control Port...................................................... 3-23
3.14.2. Selecting the Serial Data Format for the Remote Control Port .................................. 3-23
3.14.3. Selecting the Serial Control Address.......................................................................... 3-24
3.14.4. Selecting the Serial Data Control Mode ..................................................................... 3-24
3.14.5. Selecting the External Remote Control Protocol ........................................................ 3-24
3.15. SAVING AND RECALLING CONFIGURATION PRESETS ................................................. 3-25
3.15.1. How to Restore the Factory Default Settings ............................................................. 3-25
3.15.2. How to Recall a Saved User Preset Configuration..................................................... 3-25
3.15.3. How to Save the Router Configuration to a User Preset............................................ 3-26
3.16. MANAGING THE ROUTER FIRMWARE .............................................................................. 3-26
3.16.1. Reading the Router Firmware Version ....................................................................... 3-26
3.16.2. How to Update the Router Firmware.......................................................................... 3-26
Figures
Figure 3-1: Front Panel Layout.............................................................................................................. 3-1
Figure 3-2: Overview of the Setup Menu............................................................................................... 3-4
Figure 3-3: Switch Line Selection in 59.94 Hz Field Rate Systems ...................................................... 3-9
Figure 3-4: Switch Line Selection in 50 Hz Field Rate Systems ......................................................... 3-10
Tables
Table 3-1: Standard GPI Encoding Functions..................................................................................... 3-17
Table 3-2: HEX GPI Encoding Functions ............................................................................................ 3-18
Table 3-3: HEX Input Selection (HEX and AVF HEX Encoding)......................................................... 3-18
Table 3-4: AFV HEX GPI Encoding Functions .................................................................................... 3-19
Table 3-5: HEX Input Selection for AFV2 (AVF HEX Encoding) ......................................................... 3-19
Table 3-6: HEX Encoded Output Tallies ............................................................................................. 3-22