evertz X1201S - Enabling the Embedded Audio Softswitch for Clean Audio Switches (Embedded Softswitch Equipped Routers Only); Configuring the Video and Audio Inputs

X1200 Series Router Manual
OPERATION
Revision 1.3.2
Page 3-11
3.7.4. Enabling The Embedded Audio SoftSwitch For Clean Audio Switches
(Embedded SoftSwitch equipped routers only)
TRANSITION
EA SoftSwitch
embedded ss:off
embedded ss:on
This menu allows the user to enable the embedded audio SoftSwitch on the
Embedded SoftSwitch equipped routers. When Embedded Audio SoftSwitch
is On, the router will provide a clean audio switch on the audio embedded on
the V1 buss.
This function can be turned On or Off and should be Off when switching non-
linear embedded audio such as Dolby E.
3.8. CONFIGURING THE VIDEO AND AUDIO INPUTS
The INPUT SETUP menus are used to configure the input video standard for the router, to disable unused
video and audio inputs, and to configure which Audio busses are will follow video busses 1 and 2 in an
‘Audio follow video’ switch. The chart below shows the items available in the INPUT SETUP menu.
Sections 3.8.1 and 3.8.3 give detailed information about each of the sub menus.
AES Mode
Configures whether the AES will be quad 12 x 1 or dual 12 x 2 configuration
Audio Follow V1
Configures which audio busses will follow the Video 1 buss
Audio Follow V2
Configures which audio busses will follow the Video 2 buss
Video V1 and V2
Allows the user to disable unused video inputs
Audio 1A inputs
Allows the user to disable unused inputs on the Audio 1A buss
Audio 1B inputs
Allows the user to disable unused inputs on the Audio 1B buss
Audio 2A inputs
Allows the user to disable unused inputs on the Audio 2A buss
Audio 2B inputs
Allows the user to disable unused inputs on the Audio 2B buss
No Video Action
Allows the user to determine the operation when there is not video input
Input Standard
Allows the user to set the input video standard for the router