Evoqua Rivo I - Page 77

Operation
10
Rivo™ I Controller EN
75
Evoqua Water Technologies GmbH | W3T597263 Issue 01-0624
Analog inputs
Depending on the configuration of the Rivo™ Flex Mod measuring modules.
e.g. mA input 1
(depending on the configuration)
Module information:
Hardware address, Part number, Serial number, Software version, Product
name, Error code, mA-Value, Percentage
Demo Mode
Select: OFF – Demo Mode (Sine)
Label
Input: individuell
Input signal
Select: 0 - 20 mA – 4 - 20 mA
Measurement filter
Select: OFF – Minimal – Low – Medium – Strong
Input signal direction
Select: Direkt – Invers
Unit
Input: individual
Lower range
Input: individual
Upper range
Input: individual
Format
Select: #0 – #0.0 – #0.00 – 0.000
Limits
Dosing factor - Limit values
Limit value I
Min
Input – delete
Max
Input – delete
Hysteresis
Input
Limit value II
Min
Input – delete
Max
Input – delete
Hysteresis
Input