7.7.2 Describe access points:
ID (is a mandatory field): Unique name e.g. room number according to the building plan
Name (is a mandatory field): Unique name e.g. Main entrance
Description: Free description of the access points for a better understanding, e.g. Central
access, escape route to assembly point Wienerbergstraße, ...
Type of installation: freely definable, e.g. glass door, locker, automatic door, ....
Figure154 - Description of access point
Release duration: Defines the time that the EVVA access component grants for access,
after authorisation before it disengages (locks) again. The respective release time "Short"
or "Long" is defined by the respective person or the ID medium and, if authorised, triggered
on the EVVA access component. The assignment of the release period to the person and
an identification media takes place in the Person & Identification settings.
Figure155 - Release duration
Time profile: Selection of the Office Mode time profile
Event log: Defining the access event recording mode and the data recording duration
Manual Office Mode: „Manual Office Mode“, active or inactive
Shop Mode: „Shop Mode", active or inactive
To Next Page
Loading...
