7
KPM.X.Systemhandbuch_X3.0.EN.V1.9 | 05/2019 | Subjects to misprints and technical changes.
1 General information and system over-
view
This Xesar system manual describes how to operate the Xesar software and any associated Xesar
system components.
The products and/or systems described in the Xesar system manual must exclusively be operated
by persons that have been adequately qualified for the corresponding task. Qualified personnel is
able to identify risks when handling products/systems and prevent potential hazards on the basis
of their expertise.
1.1 General legal notes
EVVA concludes the contract on the use of Xesar exclusively on the basis of its General Terms of
Business (EVVA-GTB) as well as its General Licensing Conditions (EVVA-ALB) with regards to the
software for the product. Please refer to http://www.evva.com/terms.
We explicitly notify clients that the use of the locking system subject to this contract may trigger
legal approval, reporting or registration obligations, in particular with regard to data protection
(e.g. if you are establishing a comprehensive information system), as well as grant the right of co-
determination to staff in the event of use on corporate premises. Customers, clients and end users
shall be responsible for product use in compliance with legal stipulations.
The aforementioned information must be observed and passed on to operators and users as per
the defined manufacturer product liability according to product liability legislation. Non-compliance
releases EVVA from any liability.
Any use deemed as non-compliant with the contract or as unintended use as well as any repair
work or modifications that have not been explicitly approved by EVVA and all types of incorrect
servicing may cause malfunctions and are prohibited. Any modifications that have not been explic-
itly approved by EVVA render claims to liability, warranty as well as any separate guarantee claims
void.
Architects and advisory institutions are obliged to request all necessary product information from
EVVA and take into account all such information to comply with obligations regarding information
and instructions under the Product Liability Act. Specialist retailers and installers must comply with
the information in EVVA documentation and they must pass on such information to customers, if
applicable.
Please refer to the Xesar product catalogue for additional information beyond these vital instruc-
tions. These are available at http://www.evva.com/xesarhttp://www.evva.com/xesar
To Next Page
Loading...