User Manual HOW TO … February 16, 2010
Xynergi Media Production Centre Page 31
Hold down Zoom and turn the Jog Wheel (or press + or –) to change Zoom Scale. Hold down ctrl
as well, and now turning the Jog Wheel zooms the vertical scale (i.e. number of tracks).
You can select a particular Zoom Scale by holding down
Zoom and pressing a Numpad key.
Press and release
Zoom to swap between the current and last-used Zoom Scales. This can be used
effectively by setting an "editing" scale and a "travelling" scale, and toggling between them.
Transport Commands
Overview
At the bottom of the keyboard you'll find a row of "normal" transport buttons that behave as you
would expect.
"Special" commands:
REW and FF go faster and faster if you keep pressing them
Hold down
Record to display special commands on the soft keys.
Get Ready
Press the Record Megamode button.
Above the Jog Wheel
Above the Jog Wheel is a complete set of transport commands, designed to let you keep your
hand in one position for editing.
Play Jog First press is Jog. If already in Jog, pressing this key puts the transport into Play.
Review Jumps back a number of seconds, then plays. Hold down the Review key to select the
number of seconds on the Numpad.
REW+FF Stop
BLUE+
Jog Shuttle
Jog+REW Jump Left
Jog+FF Jump Right
Jog+0 Toggles linear and loop jog
Jog+00 Sets loop jog at half a frame
Jog+1 Sets loop jog at 1 frame
Jog+2 Sets loop jog at 2 frames (etc)
In Record Megamode only, hold down
Jog to display a Record button on the next key. Press both
to go into Record.
The Play Menu
Play Menu displays special play commands on adjacent buttons, and on the Soft keys.
Play Head Plays from one second before clip head (on current track)
Play Tail Plays from one second before clip tail (on current track)
Play Fade Plays from one second before clip fade out (on current track)
To Next Page
Loading...