EasyManua.ls Logo

Fairlight Xynergi - Configure Monitor Sources; Choose Source; Source Config; ALT Switches

Fairlight Xynergi
309 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
User Manual HOW TO … February 16, 2010
Xynergi Media Production Centre Page 60
Note: choosing a format wider than your current Speaker Set has no effect. You cannot “fold up
to a higher format!
Choose any other mode to leave the Format Setup menu.
Note: Stereo and Mono compatibility are immediately available as toggles on the
Stereo Comp
and Mono Comp switches, unless the current speaker set already has this format.
Configure Monitor Sources
Overview
The standard source for monitoring is the MAIN system bus.
You can choose many other sources, including other system buses, or External Source Sets, which
are used for your CD player, video machine etc.
The system remembers the last non-standard source you chose, and calls it the Alternative
Source. This can be toggled using ALT SOURCE in the Mon layout (press
Mon, then ALT SOURCE)
This guide shows you how to choose an alternative monitor source, and configure External
Sources.
Get Ready
Press the green Mon button.
Press the
Mon Setup button if it’s not already lit.
Choose Source
System buses can be chosen for immediate listening on the picture keys. To access and configure
External Sources, press the
Source Setup button. Choose any defined External Source using the
Soft keys.
Source Config
To define or change an external source, press the Source Config soft key.
Choose the external source you wish to define, and the monitor set that will play it (Control Room
or Studio Monitor).
Choose Analog Inputs or Digital Inputs at the lower left.
Choose the inputs you want to use at the upper left and their destination Monitor Elements at the
upper right. Click
Patch. Click Rename to name the set. Repeat as required.
Choose any other mode to exit Source Setup.
ALT Switches
Overview
The ALT switches in the Mon Megamode allow you to quickly change from standard settings to
alternative ones.
The standard monitoring situation is:
Main speakers, playing Main bus, listening to all appropriate speakers.
You can choose an alternative speaker set, an alternative source, and/or an alternative listening
format. This guide shows you how.

Table of Contents