User Manual HOW TO … February 16, 2010
Xynergi Media Production Centre Page 68
Link Groups
Overview
A Link Group is a collection of up to 8 paths which are selected, edited and mixed as one entity.
A Link Group must be all Tracks or all Live Feeds, never a mixture, and must be contiguously
numbered.
Selecting one member of a Link Group selects all members.
This guide shows you how to set up Link Groups.
Get Ready
Press the green Setup button.
Press the
Link Gp button.
Creating a Link Group
To create a new Link Group, press the Track or Live Feed that you wish to be the first member of
your Link Group (or the last).
To remove or change defaults for an existing Link Group, select one of the green or brown
buttons, which denote membership of a Link Group.
The system highlights 7 paths before and 7 after, which are the limits for selection of your Link
Group.
Press the last (or first) member for your Link Group.
Now choose the application of defaults:
Default Pans pans the members as though going directly to a surround bus e.g:
Two members pan hard L and R.
Three members pan L, C and R.
Six members pan L, C, R, LS, RS, and de-assign the sixth member from all bus
elements except Boom.
Feed Params copies all settings (except panning) from the first member to the others.
All Defaults executes default pans and copies feed parameters
Modifying or Removing a Link Group
Press the Link Gp button.
To remove or change defaults for an existing Link Group, select one of the green or brown
buttons, which denote membership of a Link Group.
Use one of the following soft keys to unlink the group:
Unlink unlinks the members without reassignment
Unlink and reassign unlinks the members. If the Link Group had a Boom member that was de-
assigned from all other Bus Elements, it is reassigned to them.
Alternatively you may use the soft keys change the defaults as explained in creation of Link
Groups.
To Next Page
Loading...