Fantic XE 125 - Rear Shock Absorber Sinking Adjustment (SAG) (XX 125; XX 250 Version)

3. Adjustments
USE AND MAINTENANCE MANUAL CHAPTER 3
ADJUSTMENTS2-Strokes - Edition 01 / 2023
106
B
A
– Remove the kickstand or stand from the engine and, with
the driver on board, measure the distance “B” between the
centre of the rear wheel axle and the reference on the rear
mudguard.
Standard value: 90-100mm
Rear shock absorber sinking adjustment (SAG) (XX
125 / XX 250 version)
– Place a kickstand or a stand under the engine to raise
the rear wheel off the floor and measure the distance “A”
between the centre of the rear wheel axle and the reference
mark on the rear mudguard;