4. Maintenance
USE AND MAINTENANCE MANUAL CHAPTER 4
MAINTENANCE2-Strokes - Edition 00 / 2023
111
4
2
XX 125 / XE 125
1
2
XX 250
Changing the transmission oil
– Start the engine and warm it up for several minutes and
wait for five minute;
– Place the machine on a level place and hold it on upright
position by placing the suitable stand under the engine;
– Drain the transmission oil, removing the drain bolt “1” and
the filler cap “2”;
– Install a new aluminium washer to the drain bolt “1” and
install it in its housing;
– Fill the crankcase from the appropriate opening with
transmission oil;
Transmission oil quantity
(XX 125 and XE 125 versions):
0.70 L (0.62 Imp qt, 0.74 US qt)
Transmission oil quantity
(XX 250 version):
0.75 L (0.66 Imp qt, 0.79 US qt)
Do not add additives or other substances and use
the products recommended in the “RECOMMENDED
PRODUCTS TABLE” section.
– Check the transmission oil level. Once the correct level is
reached, install the filler cap “2”.
To Next Page
Loading...
