13 Motore1. General information
USE AND MAINTENANCE MANUAL CHAPTER 1
GENERAL INFORMATION2-Strokes - Edition 01 / 2023
24
Technical data (XX 250 version)
Technical data Value(s)
Overall length:
XX 250 2185 mm (85.6 in)
Overall width:
XX 250 825 mm (32.5 in)
Overall height:
XX 250 1290 mm (50.6 in)
Seat height:
XX 250 980 mm (38.6 in)
Wheelbase:
XX 250 1485 mm (58.1 in)
Minimum ground clearance:
XX 250 360 mm (13.19 in)
Weight in running order:
XX 250 103 kg (234 lb)
Weight at full load:
XX 250 178 kg (392.4 lb)
Maximum allowable weight:
XX 250 248 kg (546.8 lb)
Engine type Liquid cooled 2-stroke, gasoline
Cylinder arrangement Single cylinder
Displacement 249 cm
3
Bore × stroke 66.4 x 72.0 mm (2.61 x 2.83 in)
Compression ratio:
XX 250 8.9–10.6:1
Starting system Kickstarter
Lubrication system Premix (30:1)
Mixture oil Premix 30:1 (API TC / JASO FD / ISO-L-EGD)
Transmission oil:
Recommended type
Periodic oil change
Total amount
10W-40 (API SL / JASO MA MA2)
0.75 L (0.66 Imp qt, 0.79 US qt)
0.80 L (0.70 Imp qt, 0.85 US qt)
Coolant liquid:
Coolant capacity (including all routes) 1.20 L (1.06 Imp qt, 1.27 US qt)
Air filter oil Air Filter Special Oil
Brake oil Synthetic Brake Fluid DOT 4
Air filter Wet element
Spark plug:
Type/Manufacturer
Gap
BR9EVX/NGK (resistance type)
0.6–0.7 mm (0.024–0.028 in)
Fuel:
Type
Tank capacity
Only super unleaded petrol (E10 acceptable)
9.0 L (2 Imp gal, 2.4 US gal)
Clutch type Wet, multiple-disc
Primary reduction system Gear
Primary reduction ratio 3.000 (63/21)
Final drive Chain
Secondary reduction ratio:
XX 250 3.571 (50/14)
To Next Page
Loading...
