Fantic XE 125 - Throttle Grip; Engine Mapping Selection Switch (XX 125; XX 250 Versions); Front Brake Lever; Rear Brake Pedal

2. Use of the vehicle
USE AND MAINTENANCE MANUAL CHAPTER 2
USE OF THE VEHICLE2-Strokes - Edition 01 / 2023
70
XX 125 / XX 250
1
1
–
+
1
1
Throttle grip
The throttle grip “1” is located on the right handlebar; it
accelerates or decelerates the engine. For acceleration, turn
the grip toward you; for deceleration, turn it away from you.
“+” : accelerate
“–” : decelerate
Engine mapping selection “Switch”
(XX 125 / XX 250 versions)
By means of switch “1” on the right handlebar, it is possible
to select two different engine mappings, which modify the
throttle response and the performance of the vehicle during
use.
MAP 1: STANDARD
MAP 2: SOFT
Mappings are set by Fantic and cannot be changed.
Front brake lever
The front brake lever “1” is located on the right handlebar.
Pull it toward the handlebar to activate the front brake.
Rear brake pedal
The rear brake pedal “1” is located on the right side of the
machine. Press down on the brake pedal to activate the rear
brake.