Fantic XE 125 - Stop Watch Setup

2. Use of the vehicle
USE AND MAINTENANCE MANUAL CHAPTER 2
USE OF THE VEHICLE2-Strokes - Edition 01 / 2023
79
2
Stop watch Setup
– Press Adjust button to choose between Auto mode (Stop
watch starts/stops according to the wheel rotation) and
Manual mode (Stop watch starts/stops by pressing the
meter button of the optional thumb switch).
– If “Auto” option is chosen, press Adjust button to exit the
Stop watch setup.
Default value: AUTO.
– If Manual mode “SW” (switch) option is chosen, press
Adjust button to enter the menu then Select button to
switch between “ON” (external button - optional) or “OFF”
(meter button).
Default value: OFF.
– Press the Adjust button to enter the ODO setting.
– From
switch to screen.
– Press the Adjust button to enter the Maintenance Oil Light
Setting.
– From
switch to screen.
– Press the Select button again to enter the Stop watch
Setup.