Fidelity Electronics A10 - Page 11

4
[PLU]
 Save current operation parameters to Production Settings PLU.
 Recall operation parameter from Production Settings PLU.
Nil.
5
[Func]
To shift between weighing, piece count, auto tare accumulation, and
animal weighing mode
2
.
Nil.
6
[Unit]
3
To shift among various weight units (if weight unit conversation is
enabled).
Go to the next parameter or internal function number.
7
[Tare]
To tare off the weight of a container.
Nil.
8
[MR]
Recall total accumulated results.
Go to the previous parameter or internal function
number.
9
[Zero]
Set weight displayed to zero when unloaded.
Quit.
10
[Print/M+]
Send print data out and/or accumulate current values to memory.
Enter, save and return.
11
[CE/x10]
Clear value inputted during the setting process, or
Trigger the extended display mode.
Clear.
12
[0] ~ [9]
Numeric keys.
 Numeric, letters and symbol keys.
 Press [0] to go to F1.
 Press [1] to go to F10.
 ……
 Press [9] to go to F90.
13
[.]
Decimal.
Decimal.
2
Depends on F11 setting.
3
Refer to F9 on how to enable/disable weight units.