Fidelity Electronics A10 - 3.2 Display Panel Description

3.2 Display Panel Description
No.
Name
Description
14
Battery Level Indicator
Visible to show remaining battery of the built-in rechargeable battery.
15
Max
1
Indicator
4
(When under dual weighing range/interval mode) Visible when instrument is operating at the first
weighing range (W
1
).
16
Max
2
Indicator
5
(When under dual weighing range/interval mode) Visible when instrument is operating in the second
weighing range (W
2
).
17
Minus Indicator
Visible when a negative value is being displayed.
18
Net Indicator
Visible when the net result is being displayed.
19
Net Indicator
Visible when the net result is being displayed.
20
Stable Indicator
Visible when weight detected is stable.
21
Zero Indicator
Visible when instrument is at zero weight status.
22
M+ Indicator
Visible when memory contains accumulated data.
23
Customer Code Indicator
Visible when customer code is in effect.
24
Product Code Indicator
Visible when a product code is in effect.
25
Pre-Tare Indicator
Visible when a preset-tare value is in effect.
26
Alibi Indicator
Flash when transaction record is sent to Alibi memory (Alibi memory).
27
Weight Unit Indicator
 kg = kilogram; g = gram lb = pound.
28
Average Piece Weight Indicator
Visible when average piece weight is displayed.
29
Quantity Indicator
Visible when quantity value (number of pieces) is displayed.
30
Numeric & Alphabetical Info Panel
Numeric value and alphabetical Info is displayed here.
31
Charge Status Indicator
 Red/Yellow: Recharging in process.
 Green: Charging completed.
32
Production Settings Indicator
Visible when Production Settings PLU is in effect.
33
Lower Case Indicator
Visible when lower case letter entry is in effect.
4
(When in Dual Range/Interval Mode) Visible when weighing range is = W1.
5
(When in Dual Range/Interval Mode) Visible when weighing range is = W2.