Fidelity Electronics A10 - Appendix P2: - Parameter Reading Commands of Production Settings PLU in effect

86
Appendix P2: - Parameter Reading Commands of Production Settings PLU in effect
Operation entry reading command format as below: -
a. Start String * “asterisk” (Hex code 02A), followed by
b. Command code as shown on below table (all commands are case sensitive), followed by
c. End String # “number sign” (Hex code 23).
Notes: -
 For RS485 communication, add @xx before start string.
 xx = machine ID number set in F18.
Command Description Table
Command Definition
Command Format
Parameter
Output
Parameter Description
Start
String
Command Code
End
String
Read Date Output Format
*
RDA
004
#
d1
Date Output Format (0 = Normal Format; 1 = Week
Format)
Read Auto Tare Function
*
RDA
012
#
d1
M = Off; A = Auto; 00 ~ 99 = Continuous tare (in term of
1/10 second)
Read Expiry Duration
*
RDA
036
#
d1
4 digits (0 ~ 9999) in terms of day