Fidelity Electronics A10 - 25. Daily Care & Maintenance

52
Err 64
The number of files in the folder path exceeds 20
--oL--
Overload (Gross weight is more than Max plus 9d)
HALT
Major system error detected. Power off instrument and remove power adaptor
immediately. Then check load cell connection and system power status.
UndEr
Negative Weight value exceeds display range
Reboot
Important parameters have been changed. Power off and then power on instrument
again to reboot.
------
Negative Tare value exceeds display range
25. Daily Care & Maintenance
1. Clean this instrument with a soft, damp cloth. If necessary, use a mild detergent in water.
2. Do not use any harsh, abrasive material, acetone, volatile solvent, thinner, or alcohol for cleaning.
3. Verify the accuracy of this instrument periodically. Re-calibrate if necessary. In some countries,
calibration requires an authorized/qualified agent. Contact your dealer for more information.
4. Store this instrument in a dry and clean place.
5. Recharge battery before and every 4 months during long time storage.