Fidelity Electronics A10 - Appendix M: - System Execution Commands

78
Appendix M: - System Execution Commands
System execution command format as below: -
a. Start String * “asterisk” (Hex code 02A), followed by
b. Command code as shown on below table (all commands are case sensitive), followed by
c. End String # “number sign” (Hex code 23).
Notes: -
 For RS485 communication, add @xx before start string.
 xx = machine ID number set in F18.
Command Definition
Command Format
Start String
Command Code
End
String
System Reboot
*
EX
F000
#
All Segment Check
*
EX
F002
#
System (F7~F34) Initialization
*
EX
F006
#
Reset WIFI Module to Default Setting
*
EX
F048
#
Reset Bluetooth Module (BT 2.0 only)
*
EX
F053
#
Reload Factory Settings to BT Module (BT 2.0 only)
*
EX
F054
#
Save changes and restart
*
EX
F999
#