Fidelity Electronics A10 - Page 25

25
3. Press [Unit] or [MR] until the preferred output date duration parameter appears and press [Print/M+].
• If Day is selected, input the requested date value and press [Print/M+] to output.
• If Month is selected, input the first date of the requested month value (e.g., 19.12.01 for the month of December 2019) and press
[Print/M+] to output.
• If Period is selected, input the requested starting date value and press [Print/M+] and then input the requested ending date value
and press [Print/M+] to output.
• If All is selected, press [Print/M+] to output.
F36
Expiry Duration
Expiry duration = **0 ~ 9999
Notes: -
 Expiry duration 0 =Today
 Expiry duration 1 = Tomorrow (today +1)
 Expiry duration 14 = 2 week (today + 14 day)
Setting procedures: -
1. Input expiry duration and press [Print/M+] to confirm and save.
To clear an expiry duration, press [CE/x10] and press [Print/M+].
F37
Production Settings
PLU Auto Search
via Barcode
Scanner Input
C Code (Auto Search by Customer Code)
**Off (Disable)/On (Enable)
P Code (Auto Search by Product Code)
**Off (Disable)/On (Enable)
Refer to paragraph 20 for more information