Fidelity Electronics A10

To Next Page

To Previous Page

f. Click Download.

7. On Save Form page: -

a. make sure that the Form name is correct,

then

b. Click Save

8. On Select Store Media page: -

a. select Printer, then

b. select Printer’s Flash ROM, then

c. click OK

Main Page

Default Chapter2
- Table of Contents2
1 Reminders8
- Metrological Legislation8
- Seal & Serial Number8
- Warm-Up Time8
- Placing this Instrument8
- Cautions8
- Support & Service8
2 Specifications9
- Panel & Keys10
  - Key Board Description10
  - Display Panel Description12
4 Connection Points13
- Connection Pins & Plugs13
- Multi-Function Comport Pin Assignment Table14
- RS232 Comports Pin Assignment for Comport 0 & Comport 114
5 Power Adaptor, Built-In Batteries & Recharging14
- Power Adaptor14
- Before Plugging in Power Adaptor to Electricity Grid14
- Before First Time Use14
- CR1220 Real-Time Clock Backup Battery14
- Battery Voltage & Battery-Operation Application14
- Battery lo15
- Battery Charging Status15
6 Internal Function Settings15
- About Internal Function Table15
- How to Enter & Select Internal Function15
- Key Function During Internal Function Setting & Operation Mode15
- Internal Function Table16
7 Recommended Setting Procedures for User26
8 UART & Comport Settings26
- UART Transmission Type & Assigned Comport No. Table26
- Parameters Table for Pc/Command/Serial Scanner27
- Parameters Table for Auto 1 ~ 3 & Manual27
- When Bluetooth, WIFI & LAN Is Selected28
9 Basic Operation29
- Power Instrument on & off29
- Power on Countdown Process29
- Operator Number29
- Warm-Up Time29
- Keyboard Lock29
- Loading & Weighing29
- Manual Zero29
- Tare Functions30
- Select the Preferred Weight Unit30
- Select the Preferred Function Mode31
- Check Functions31
- Tri-Color Backlight31
- Auto Power Saving & Auto Power-Off Time32
- Extended Display Mode32
10 Memory & Data Related Operation32
- Memory Accumulation32
- Expiry Date33
- Machine ID, Group & Operator Numbers33
- Inputting Numbers, Letters, Symbols Via Keyboard33
- Customer/Product Code & Description33
11 Quick Access PLU (Quick PLU)34
- Weight Check Limits Quick Plus34
- Quantity Check Limits Quick Plus35
- Preset Tare Value Quick Plus35
- Customer/Product Code & Description Quick Plus36
- Average Piece Weight Quick PLU37
12 Piece Count Mode37
- Obtaining Average Piece Weight38
  - By Manual Entry Method38
- By Sampling Method38
- Auto Average Piece Weight Enhancement Function38
- Shift Among Quantity, Average Piece Weight & Weight Info38
- Recall the Average Piece Weight before Powered off38
13 Action-Tare-Memory (ATM)39
- Description of ATM Mode39
- ATM Mode Settings39
- Start Using ATM39
14 Animal Weighing Mode40
- Description of Animal Weighing Mode40
- Animal Weighing Mode Settings40
- Start Using Animal Weighing40
15 Near Zero Function Description41
16 Data Output Protocols & Formats41
- PC Output Protocols41
- Data & Print Formats41
  - Predefined Output Formats41
  - Lab 2 Customized Output Format41
17 Barcode Scanner42
- Barcode Scanner Setup42
  - Serial Barcode Scanner Setup42
  - CT10 Serial Barcode Scanner Setup42
- Barcode Scanner Functions42
  - Simulating Operation Key42
  - Entering Customer/Product Code & Operator Number43
- Advanced Applications about Customer & Product Code Scanning43
18 Label Printing43
- Label Format Groups & Label File Names43
  - FL1 (Label Format Group 1)43
  - FL2 (Label Format Group 2)44
- Quick Access to Label Settings44
- Repetitive Printout44
19 Alibi Transaction Memory & Management Report45
- Alibi Memory Description45
- Define When a Transaction Data Is Saved to Alibi Memory46
- Adding Short Noted to Alibi Management Report46
- Output & Settings for Alibi Memory & Management Report47
- Totalization47
20 Barcode Scanner & Auto Database Search47
21 Production Settings PLU48
- Create & Save Production Settings PLU48
- Recall a Production Settings PLU48
- New Code Scanned/Inputted When a Production Settings PLU Is Running49
  - In Case New Customer/Product Code Is by Barcode Scanner49
  - In Case New Code/Description Is Inputted by Keyboard49
- To Quit from the Current Production Settings PLU49
  - Keyboard Method49
  - Scanner Method49
22 Commands49
23 Built-In Battery & Recharging50
- Battery Operation Time50
- Symbols & Remaining Power50
- Battery Recharge50
24 System & Error Codes51
25 Daily Care & Maintenance52
Appendix A: - Pre-Defined PC Output Protocols53
- Data Abbreviation Table53
- Output Formats Tables54
Appendix B: - Customized PC Output Protocol56
- Customized PC Output Protocol Setting Procedures56
- Customized PC Output Content Table57
Appendix C: - Lab 1 Output Formats59
- Weighing, ATM & Animal Mode Illustration59
- Piece Count Mode Illustration59
Appendix D: - Lab 2 Standard Output Format60
- Weighing & ATM Mode Illustration60
- Piece Count Mode Illustration60
- Animal Weighing Mode Illustration61
Appendix E: - Customizing Lab 2 Print Format62
- Print Output Format Variants Table62
- To Edit Custom Lab 2 Print Output Format63
Appendix F: - Lab 3 Output Format64
Appendix G: - Lab 4 Output Format65
Appendix H: - Lab 5 Output Format66
Appendix I: - TSC Printer Installation, Setup & Label Upload Procedures67
- Get the below Ready before Printer Installation67
- Printer Installation67
- Uploading TCF File to Printer68
- Create & Upload Label to TSC Printer69
  - Selecting the Correct Edition for Bartender Software69
  - Adding Information from Instrument to Label & Uploading to a TSC Printer69
Appendix J: - Sbarco Printer Installation, Setup & Label Upload Procedures71
- Get the below Ready before Printer Installation71
- Bardrawer Software & Printer Driver Installation71
- Create & Upload Label to Sbarco Printer72
Appendix K: - Label Programming, Illustration & Samples74
- Label Prompt Command Table74
- K2. Label Programming Illustration76
  - Label Illustration for LP50 & TSC76
  - Label Illustration for Sbarco76
- Sample Labels76
Appendix L: - Keyboard Commands77
Appendix M: - System Execution Commands78
Appendix N: - Management Report Execution Commands79
Appendix O: - System Parameter & Operation Entry Setting Commands80
Appendix P1: - System Parameter & Operation Entry Reading Commands83
Appendix P2: - Parameter Reading Commands of Production Settings PLU in Effect86
Appendix Q: - Operation Result Reading Commands87
Appendix R: - Quick PLU Saving Commands89
Appendix S - Quick PLU Reading Commands91
Appendix T: - Production Settings PLU Saving Commands93
- Command Description Table93
- Parameter Description Table93
Appendix U: Production Settings PLU Reading Commands95
- Command Description Table95
- Parameter Output Description Table95
Appendix V: Production Settings PLU Execution Commands97

Fidelity Electronics A10 - Page 73

Table of Contents

Related product manuals