Fidelity Electronics A10 - Page 90

90
 d3 = Customer Description. Maximum 30
characteristics (; * # not accepted). Blank =
Nothing.
Save Product Code and
Description to Quick PLU
*
ST
QP
PCDE
;d1;d2;d3#
 d1 = Quick PLU number 000~999
 d2 =Product Code. 1~18-digit (* or and # will not
be accepted). Blank = Nothing.
 d3 = Product Description. Maximum 30
characteristics (; * # not accepted). Blank =
Nothing.
Note R1: -
• S1 = command for operation with weight unit = kg.
• S2 = command for operation with weight unit = g.
• S3 = command for operation with weight unit = lb.
• ST = command for operation disregards weight unit.
Note R2: -
• S1 & S2 = value to be inputted in terms of g.
• S3 = command for operation during weight unit lb.