Fidelity Electronics A10 - Page 94

94
Parameter #
Description
Parameter
d6
Average piece weight
(Note T2, T3)
Maximum 8 digits, including decimal. Blank = Nothing
d7
Low Check limit
Maximum 8 digits, including decimal. Blank = Nothing
d8
Hi Check limit
Maximum 8 digits, including decimal. Blank = Nothing
d9
Check Target
(Note T3)
W = Weight
Q = PCS
Blank = Weight
d10
Auto Tare Type
M = Manual tare
A = auto tare
00 ~ 99 = Continuous tare in term of 1/10 second
Blank = current instrument setting.
d11
Preset Tare Value
Maximum 8 digits, including decimal.
Blank = Nothing
d12
Date Format
0 = Normal
1 = Week
d13
Expiry Duration
Maximum 4 digits (0 ~ 9999)
0 or blank = F4 value
1 ~ 9999 = No. of day plus F4 value
d14
Individual Label File Number to Print
FL1 (Label Format Group 1)
00 ~ 99
00 = No label file output
d15
Totalized Label File Number to Print
FL2 (Label Format Group 2)
00 ~ 99
00 = No label file output
Note T2: -
• S1 & S2 = value to be inputted in term of g. S3 = value to be inputted in term of 1/1000lb
• When average piece weight is not = zero or blank, instrument will switch to Piece Count Mode automatically (disregarding F11 settings) when such a
Production Settings PLU is recalled by scanner.
Note T3: - When average piece weight is not = zero or blank, instrument will switch to quantity check mode automatically.