Fisher FERITSCOPE FMP30 - Page 182

Operator‘s Manual FERITSCOPE
®
FMP30 Page 177
Instrument Settings - Service Function Menu
10.7.4 Measuring Mode - Standard/Area Measurement/Automatic
Measurement
Key sequ. /
Action
Detail of the display Explanation
Select Measurement by pressing the arrow
key
 or  and confirm the selection with
ENTER.
ENTER Select Measuring Mode by pressing the ar-
row keys
 or  and confirm the selection
with ENTER.
ENTER
Select the desired measuring mode by
pressing the arrow keys
 or  .
The standard measuring mode will be en-
abled. Confirming with ENTER will return
you to the menu for the measurement.
Use DEL at any time to cancel the proce-
dure.
Area measurement is possible (enabled),
7.3.3 ‘Automatic Measurement Acquisi-
tion’, beginning on Page 87.
Confirming with ENTER will return you to
the menu for the Measurement.
Use DEL at any time to cancel the setting
procedure.