Page 178 Operator‘s Manual FERITSCOPE
®
FMP30
Instrument Settings - Service Function Menu
Select the mode for “Automatic measure-
ment” by pressing the arrow keys
or .
Automatic measurement is possible (en-
abled)
7.3.3 ‘Automatic Measurement Acquisi-
tion’, beginning on Page 87.
Use ENTER to confirm the selection.
Use DEL at any time to cancel the proce-
dure.
ENTER Select the desired number of measurements
by pressing the arrow keys
or and con-
firm the selection with ENTER.
Use DEL at any time to cancel the setting
procedure.
ENTER Enter the time interval by pressing the arrow
keys
or .
Confirming with ENTER will return you to
the menu for the Measurement.
Use DEL at any time to cancel the setting
procedure.
Key sequ. /
Action
Detail of the display Explanation
To Next Page
Loading...