Fisher FERITSCOPE FMP30 - Page 58

Operator‘s Manual FERITSCOPE
®
FMP30 Page 53
Applications
5.6.7 Measured Variables
The readings will be displayed on the screen corresponding to the set mea-
sured variables.
The following measured variables can be set from the Service function
( 10.7.6 ‘Measured Variable’, beginning on Page 180):
 Fe % or FN (display of the -ferrite content in ferrite percent or in ferrite
numbers),
 normalized countrate X
 Countrate X
 Fe % / FN and Xs
 Xn and Xs
Key sequ./
Action
Detail of display Explanation
MENU

Use MENU to start Settings.
Press the arrow key
, until “Offset” is
highlighted on the display.
ENTER Use ENTER to confirm the selection “Off-
set”.
 or 
Press the arrow keys to set the desired Off-
set value
ENTER
Press ENTER to confirm the selection/entry
and return to the menu to enter additional
settings.
Press DEL to return to the measurement
screen.
The instrument is ready to make measure-
ments.