FLEX-6000 Signature Series – Maestro User Guide
Copyright 2024 FlexRadio, Inc. All Rights Reserved. | Page 108
Regardless of the outcome, when in Memory mode, the ATU will update its stored settings so that
they can be reapplied when the transmitter is tuned to the frequency again.
For high Q antennas that have a very narrow low SWR range, ATU memories may be saved every 10
kHz for a very granular ATU memory profile for that particular antenna.
To clear the ATU memories, tap and hold the ATU MEM button until the Clear ATU Memories
option appears, as shown below. Tap the option to clear the memories.
To Next Page
Loading...
