FlexRadio Signature FLEX-6000 Series User Manual

FLEX-6000 Signature Series – Maestro User Guide
Copyright 2024 FlexRadio, Inc. All Rights Reserved. | Page 88
19.2 CW TRANSMITTING
To transmit in CW mode using the keyer built into the FLEX-6000 radio, you will need either a
straight key or an iambic paddle. Refer to the FLEX-6000 Hardware Reference Manual in section 0,
Maestro “C” External Monitor Port
The external monitor port is provided to connect an external monitor to your Maestro device. The
Maestro screen is then "mirrored" to the external monitor providing a larger viewing field.
19.2.1 Straight Key and Paddles Connection
For CW operation, the ⅛ inch (3.5mm) TRS KEY connector accepts a TRS plug for operating a keyer
with paddles or a straight key.

FlexRadio Signature FLEX-6000 Series Specifications

General

Brand	FlexRadio
Model	Signature FLEX-6000 Series
Category	Transceiver
Language	English