Name: FlexRadio Signature FLEX-6000 Series
Brand: FlexRadio
Rating: 4 (1 reviews)

To Next Page

To Previous Page

FLEX-6000 Signature Series – Maestro User Guide

6 CONNECTING TO A RADIO

After Maestro starts, a screen is displayed showing radios found on your local network. Maestro

locates these radios using a network broadcast protocol that is limited to the local subnet that

Maestro is connected to. If your radio is running and is connected to your local network, it should

appear in the Select Radio screen as shown below:

Select a radio in the Select Radio screen by tapping it. If the radio is not in use, it will be shown as

above. If it has one client already attached, the word “multiFlex” and the name of the attached

station will be shown in parenthesis under the name of the radio, as shown below. If all of the

available multiFlex connections are in use, you will see “In Use” under the radio’s name.

Questions and Answers:

Need help?

Do you have a question about the FlexRadio Signature FLEX-6000 Series and is the answer not in the manual?

FlexRadio Signature FLEX-6000 Series Specifications

General