Name: FlexRadio Signature FLEX-6000 Series
Brand: FlexRadio
Rating: 4 (1 reviews)

To Next Page

To Previous Page

FLEX-6000 Signature Series – Maestro User Guide

37 RESTORING TO FACTORY DEFAULTS

Restoring the radio to factory defaults will clear any installed waveform modules, persistence, and

profile data in the radio and return it to its original state. Default profiles are restored if they have

been deleted. It is recommended that you make a backup of your Global, Transmit, and MIC

profiles before resetting the radio back to factory defaults.

NOTE: This should only be used as a last resort. If you are having trouble with your radio,

please submit a HelpDesk support request.

FLEX-6700 and FLEX-6500 Reset Procedure

With the radio powered off, press and hold down the “OK” button on the front panel of the radio.

Momentarily press and release the power button to power on the radio. Continue holding the OK

button until the front display counts down to 0, the power LED starts blinking white and the

“CALIBRATING…” message is displayed, then release the OK button. Allow the radio to continue

booting normally.

FLEX-6300 Reset Procedure

With the radio powered off, press and hold down the power button until the Power LED blinks

white, then release the power button. Allow the radio to continue booting normally.

Questions and Answers:

Need help?

Do you have a question about the FlexRadio Signature FLEX-6000 Series and is the answer not in the manual?

FlexRadio Signature FLEX-6000 Series Specifications

General