FLEX-6000 Signature Series – Maestro User Guide
Copyright 2024 FlexRadio, Inc. All Rights Reserved. | Page 177
35.3.9 Auxiliary Meters
A set of auxiliary meters can be displayed on the Maestro display by tapping the Meters button at
the bottom right corner of the display. When two panadapters are displayed, the button is found
on the right side of the display between the panadapters.
When the meters are displayed, the panadapter(s) are made narrower and move to the left side of
the display; the meters are displayed on the right. “Plus” and “minus” buttons are displayed below
the meters. Tapping the “plus” button adds a meter, and tapping a “minus” button removes a
meter. The value displayed in each meter can be selected by tapping on the meter. A selection of
values is available that depends on the equipment connected to the radio.
To Next Page
Loading...
