Number of entries.
Pre-fill mode.
In-flight correction factor.
Zero check time.
Tare delay.
Tare average time.
Delay after prefill.
Blanking time.
In-flight delay time.
Dosed weight average time.
Zero tolerance.
Tare reference.
Tare tolerance.
Pre-fill level for 1
st
prefill.
Fine fill weight.
Filling weight.
In-flight value.
Pre fill level for 2
nd
prefill.
Timeout value for filling cycle
Underweight post fill time.
Tare interval.
Bag Rupture blanking.
Medium fill weight.
Production counter.
Number of parameters
PreFill Mode PD1 command.
Inflight Correction PD2 command.
Zero Check time PD3 command.
Tare Delay PD4 command.
Tare Average Time PD5 command.
Delay After Prefill PD6 command.
Blanking Time PD7 command.
Inflight Delay Time PD8 command.
Fill Weight Average Time PD9 command.
Zero Tolerance PD10 command.
Tare Reference PD11 command.
Tare Tolerance PD12 command.
Prefill Level 1 PD13 command.
Fine Fill Weight PD14 command.
Filling Weight PD15 command.
Inflight Value PD16 command.
Prefill Level 2 PD17 command.
Fill Timeout Value PD18 command.
Underweight Post Fill Time PD19 command.
Tare Interval PD20 command.
Bag Rupture Blanking PD21 command.
Medium Fill Weight PD22 command.
Production Counter PD23 command.
To Next Page
Loading...
Need help?
General
