Number of parameters.
Analog action AA command.
Analog high value AH command.
Analog low value AL command.
Filter setting FL command.
Not used.
Digital Outputs IO command.
Digital Inputs IN command
Measuring Time MT command.
Filter mode FM command.
No-motion range NR command.
No-motion time NT command.
Digital outputs mask OM command.
Not used.
Start Delay SD command.
Not used.
Not used.
Update rate UR command.
Zero track (TAC protected) ZT command.
Not used.
Not used.
Analog mode AM command.
Pre-filter PF command.
Preset Tare SP command.
Not used.
Analog Reference AR command