Flowserve Limitorque MX-40 - Complete Conversion to SMT Controls

149
Limitorque MX Maintenance and Spare Parts FCD LMENIM2314-00 – 07/08
flowserve.com
5.20 Complete Conversion to SMT Controls
NOTE: In addition to the SMT controls, a different terminal block (P/N 26100-006) and contactor
assembly (P/N 21600-009 or 26100-010, or 26100-017) are required for a complete conversion to SMT
controls.
Follow the steps as listed in Section 5.8.1 for removal of the existing through hole terminal block. To
replace with new SMT ready terminal block (P/N 26100-006) follow steps as listed in Section 5.8.2.
Follow steps as listed in Section 5.10 for removal of the existing contactor assembly.
Swanson Flo | 800-288-7926 | www.swansonflo.com