Limitorque QX Electronic Actuator FCD LMENIM3306-06 – 07/14
8
NOTE: Removal of any cover, other than the terminal compartment cover, will invalidate the unit warranty. Exposure
of actuator components to an environment that results in deterioration of internal components will also invalidate the
unit’s warranty.
• During final field installation, ensure that all cable entries are correctly sealed in accordance with National Standards
or Regulatory Authorities. All temporary transit plugs must be removed and any unused cable entries closed in an
approved manner. See Section 3.3.3, Sealing Cable/Conduit Entries.
To Next Page
Loading...
