Fluidwell E018 User Manual

E119-P
FW_E119-P_M_v0301-02_EN Page 9
3.3.2 DELIVERY MODE
The delivery mode is used to print a delivery ticket with the current totalized value after a command
of the operator. The delivery ticket shows specific delivery data (such as a header, start and finish of
the delivery and delivery details).
The delivery mode functions in a continuous way and a separate start command is not required.
When the previous delivery is ended, the new delivery is immediately started automatically.
When the delivery mode is enabled, the operator cannot clear the totalizer separately, but instead
must end the delivery. This triggers the printing of a delivery ticket, immediately followed by the
clearing of the totalizer and the start of a new delivery. Ending a delivery is done in the same way
the totalizer is cleared: either via the control panel or via a configured remote control input. This is
explained in Section 4: Operation[»11].
When a delivery is ended, a delivery ticket as shown in below example is printed:
====================
Header line 1
Header line 2
Header line 3
Header line 4
--------------------
DELIVERY TICKET
Print date: 10/16/20
time: 12:34:56
Ticket nr: 1234567
Unit S/N: YYWWNNN
Unit ID: 1234567
--------------------
Delivery number:
1234567
Delivery total:
8456.73 GAL
Delivery start:
10:15:49 10/16/20
Delivery end:
12:34:56 10/16/20
Accumulated total:
20528794.49 GAL
====================
Adjustable number of
blank rows (up to 9)
Configurable header
(up to 4 rows)
Actual time and date
Ticket and unit
information
Delivery information
Printing Accumulated
total can be disabled
Fig.4: Delivery ticket example
When the delivery mode is enabled:
● The totalizer cannot be cleared separately but is cleared automatically when the delivery is
ended.
● It is still possible to print a totalizer ticket, for example for end of day purposes.
● The same delivery ticket can be reprinted as long as no other ticket is printed, as that will
overwrite the internal ticket data.
● The remote control inputs can be configured to end the delivery (and print a delivery ticket) or
reprint the last printed ticket.

Fluidwell E018 Specifications

General

Brand	Fluidwell
Model	E018
Category	Measuring Instruments
Language	English